★学习及工作经历

2000.09—2004.06 兰州理工大学材料科学与工程学院材料成型及控制工程专业学习，获工学学士学位；

2004.07—2006.08 北京宣得精密组件有限公司工程部冲压模具工程师；

2006.09—2009.06 太原理工大学表面工程研究所材料加工工程专业学习，获工学硕士学位；

2009.08—2013.08 台州科技职业学院机电工程系教师；

2013.09—2016.06 太原理工大学应用力学与生物医学工程研究所固体力学学习，获工学博士学位；

2016.07—至今 太原科技大学菲律宾ABG欧博网教师.

★主讲课程

本科生：材料力学、结构力学

研究生：高等固体力学

★获奖及成果

●国家奖项

2015年度博士研究生国家奖学金（No. 2015-01401）.

●省级荣誉

2018年山西省“三晋英才”之青年优秀人才

2023年山西省“高校教学名师”

●校级获奖

2017年获得太原科技大学菲律宾ABG欧博网第十届青年教师教学基本功大赛二等奖；

2017年获得太原科技大学第十四届青年教师教学竞赛三等奖；

2019年获得太原科技大学菲律宾ABG欧博网第十届青年教师教学基本功大赛三等奖；

2019年太原科技大学校级教学成果二等奖.

2021年太原科技大学课程思政教学设计大赛一等奖

●校级荣誉

2019年度太原科技大学“2018-2019年度优秀青年教师”.

2022年度太原科技大学“课程思政优秀教师”.

●主持的科研项目

1.国家自然科学青年科学基金项目“基于微压入技术的高聚物微尺度粘弹性行为研究及跨尺度分析（11702182）”，主持，结题.

2.山西省自然科学基金面上项目“镍基合金高温压痕蠕变特性及宏/微观演化机理研究（202203021221159）”，主持，在研.

●主持的教研项目

1.山西省研究生教育改革课题“强化研究生实践创新能力培养的实践与探索研究（2022YJJG204）”，主持，在研.

2.山西省高等学校教学改革创新项目“校企协同视角下地方高校力学专业学生创新能力培养与实践（J20220726）”，主持，在研.

★指导本科生的大创项目

1.基于旋涡气流的汽车排气筒设计及流场分析，XJ2019055，太原科技大学大学生创新创业训练计划项目，2019/09-2021/05，结题

2. FDM 3D打印PLA结构制件的动态力学行为研究，201910109010，国家级大学生创新创业训练计划项目，2019/09-2021/05，结题.

★发表论文

（1）刘二强,鲍明东,田林海,唐宾.元素成分对磁控溅射TiNi薄膜结构性能的影响及其控制.电镀与涂饰, 2009, 28(07): 31-134. (核心)

（2）Hefeng Wang, Xuefeng Shu,Erqiang Liu, Zhijun Han, Xiuyan Li, Bin Tang. Assessments on corrosion, tribological and impact fatigue performance of Ti- and TiN-coated stainless steels by plasma surface alloying technique. Surface & Coatings Technology, 2014, 239: 123-131. (SCI)

（3）Xiaomin Jin, Lizhen Gao,Erqiang Liu, Feifei Yu, Xuefeng Shu, Hefeng Wang. Microstructure, corrosion and tribological and antibacterial properties of Ti-Cu coated stainless steel. Journal of the Mechanical Behavior of Biomedical Materials, 2015, 50: 23-32. (SCI)

（4） Hefeng Wang, Rui Zhang, Zhi Yuan, Xuefeng Shu,Erqiang Liu, Hefeng Wang, Zhijun Han. A comparative study of the corrosion performance of titanium (Ti), titanium nitride (TiN), titanium dioxide (TiO2) and nitrogen-doped titanium oxides (N-TiO2), as coatings for biomedical applications. Ceramics International, 2015, 41(9): 11844-11851. (SCI)

（5）Erqiang Liu, Hefeng Wang, Gesheng Xiao, Guozheng Yuan, Xuefeng Shu. Creep-related micromechanical behavior of zirconia-based ceramics investigated by nanoindentation. Ceramics International, 2015, 41: 12939–12944. (SCI)

（6）Erqiang Liu, Mingdong Bao, Guozheng Yuan, Gesheng Xiao, Tao Jin, Zhigang Li, Xuefeng Shu. Characteristics of TiNi thin films deposited by magnetron sputtering system with optical emission spectroscopy monitor. Surface Review and Letters，2015, 22(5): 1550063(1-8).（SCI）

（7）孙瑞敬,刘二强,袁国政,李志刚,杨雪霞,树学峰.压入深度和应变率对氧化锆陶瓷纳米压痕测量值的影响.科学技术与工程, 2015,15(36): 105-108+122. (核心)

（8）Xiaomin Jin, Lizhen Gao, Hefeng Wang,Erqiang Liu. Characterization and tribocorrosion behavior of sputtered NiTi coatings. International Journal of Materials Research, 2016, 107(2): 114-122. (SCI)

（9）Xiaochao Jin, Zhihua Wang, Jianguo Ning, Gesheng Xiao,Erqiang Liu, Xuefeng Shu. Dynamic response of sandwich structures with graded auxetic honeycomb cores under blast loading. Composites Part B-Engineering, 2016, 106: 206-217. (SCI)

（10）刘二强,肖革胜,王鹤峰,杨雪霞,树学峰.单轴拉伸确定粘弹性材料瞬时模量的测试方法.高分子材料科学与工程, 2016, 32(8): 104-108. (EI)

（11）Erqiang Liu, Gesheng Xiao, Hefeng Wang, Xuexiao Yang, Xuefeng Shu. Determination of the Poisson's ratio of viscoelastic materials based on the linear rheological model using instrumented indentation. Soft Materials, 2016, 14(1): 38-45. (SCI)

（12）Erqiang Liu, Gesheng Xiao, Wufei Jia, Xuefeng Shu, Xuexia Yang, Yulei Wang. Strain-induced phase transformation behavior of stabilized Zirconia ceramics studied via nanoindentation. Journal of the Mechanical Behavior of Biomedical Materials, 2017, 75:14-19. (SCI)

（13）Gesheng Xiao, Erqiang Liu, Tao Jin, Xuefeng Shu, Zhihua Wang, Guozheng Yuan, Xuexia Yang. Mechanical properties of cured isotropic conductive adhesive (ICA) under hygrothermal aging investigated by micro-indentation. International Journal of Solids and Structures. 2017, 122-123: 81-90. (SCI )

（14）贾武斐,林伟辉,刘二强,肖革胜,树学峰.单斜氧化锆晶体压痕的分子动力学模拟研究.太原理工大学学报, 2017, 48(06): 1014-1020. (核心)

（15）吉新阔,肖革胜,刘二强,杨雪霞,树学峰.高温下不同银含量微电子胶连点的力学性能及膨胀系数不匹配热应力.复合材料学报,2017, 34(11):2455-2462. (核心)

（16）Ji Qiu, Tao Jin, Buyun Su, Qian Duan, Xuefeng Shu,Erqiang Liu, Xin Li. A Criterion Describing the Dynamic Yield Behavior of PMMA. Macromolecular Research, 2019, 27(8): 750-755. (SCI)

（17）Ji Qiu, Tao Jin, Gesheng Xiao, Zai Wang,Erqiang Liu, Buyun Su, Dan Zhao, Xuefeng Shu. Effects of pre-compression on the hardness of CoCrFeNiMn high entropy alloy based an asymmetrical yield criterion. Journal of Alloys and Compounds, 2019, 802: 93-102. (SCI)

（18）Chao Chang, Gesheng Xiao,Erqiang Liu, Jinbao Lin, Xuexia Zhang, Xu Long, Lele Zhang. Revisiting the procedure for characterising mechanical properties in welded joints through nanoindentation. Materials Science and Technology, 2019, 35(8): 986-992. (SCI)

（19）Lu Meng, Ji Qiu, Zhihua Wang,Erqiang Liu, Xuefeng Shu, Gesheng Xiao. Indentation pop-in behavior of CoCrFeNiAl0.3 high-entropy alloy. Materials Research Express, 2019, 6(12): 1265d4. (SCI)

（20）Gesheng Xiao, Xuexia Yang, Zhigang Li, Ji Qiu, Chao Chang,Erqiang Liu, Qian Duan, Xuefeng Shu, Zhihua Wang. Determination of power hardening elastoplastic constitutive relation of metals through indentation tests with plural indenters. Mechanics of Materials, 2019, 138: 103173. (SCI)

（21）邱吉,金涛,苏步云,树学峰,刘二强.有机玻璃非线性应力松弛行为表征与本构模型.实验力学, 2019, 34(04):616-622. (核心)

（22）Ji Qiu, Tao Jin, Buyun Su, Qian Duan, Xuefeng Shu,Erqiang Liu, Zhiqiang Li. Strain Rate Sensitivity of Yield Response of PMMA: Experimental Characterization and Material Modeling. Journal of Testing and Evaluation, 2020, 48(5): 3752-3767. (SCI)

（23）You Jia, Zhichun Yang,Erqiang Liu, Yanhong Fan, Xuexia Yang. Prediction of random dynamic loads using second-order blind source identification algorithm. Proceedings of the Institution of Mechanical Engineers Part C, 2020, 234(9): 1720-1732. (SCI)

（24）Shijie Ding, Lingyu Kong, Yanjuan Jin, Jinbao Lin, Chao Chang, Huaying Li,Erqiang Liu*(通讯作者), Haitao Liu. Influence of the Molding Angle on Tensile Properties of FDM Parts with Orthogonal Layering. Polymers for Advanced Technologies, 2020, 31(4): 873-884. (SCI)

（25）马宇宏,肖革胜,刘二强,杨雪霞,树学峰.无铅焊料合金压入蠕变性能参数表征研究.力学季刊, 2020, 41(03):537-542. (核心)

（26）Gesheng Xiao, Zhigang Li,Erqiang Liu, Li Qiao, Xuefeng Shu, Ruijing Sun. Microscale mechanical properties dependent on the strain rate and temperature of cured isotropic conductive adhesive. Mechanics of Time-Dependent Materials, 2021, 25(2):249-264. (SCI)

（27）Erqiang Liu, Lingyu Kong, Gesheng Xiao, Jinbao Lin, Guanghui Zhao, Huaying Li. Creep correction of elastic modulus and hardness for viscoelastic materials during microindentation. Polymers for Advanced Technologies, 2021, 32(3): 955-963. (SCI)

（28）Erqiang Liu, Jianguo Wu, Huaying Li, Haitao Liu, Guanghui Zhao, Lingyu Kong, Jinbao. Lin, Gesheng Xiao, You Jia. Rate sensitivity and deformation mechanism of semi-crystalline polymers during instrumented indentation. Journal of Polymer Science, 2021, 59(5):451–461. (SCI)

（29）Erqiang Liu, Jianguo Wu, Huaying Li, Haitao Liu, Gesheng Xiao, Qiang Shen, Lingyu Kong, Jinbao Lin. Research on viscoelastic behavior of semi-crystalline polymers using instrumented indentation. Journal of Polymer Science, 2021, 59(16): 1795-1806. (SCI)

（30）Gesheng Xiao, Yuhong Ma, Xinkuo Ji, Tiejun Wang, Xuefeng Shu,Erqiang Liu. Effective acquisition of elastoplastic and creep parameters of lead-free solder alloy from high-temperature micro-indentation eliminating the size effect. Mechanics of Materials, 2021, 160: 103985. (SCI)

（31）刘二强, 孔令宇,赵广辉,李华英,林金保,贾有,刘俊.浮封O型圈粘弹性行为研究及结构优化设计.润滑与密封, 2021, 46(8):94-98.(核心)

（32）孔令宇,武建国,武雷刚,刘二强*(通讯作者),申强,林金保.基于晶体塑性的镍基单晶合金横向高温力学性能研究.特种铸造及有色合金, 2021, 41(9):1097-1102.（2022年度中国机械工程学会优秀论文）(核心)

（33）徐兵,翁剑峰,刘二强.基于VB的二次曲线回转体零件宏程序智能平台开发.工具技术, 2021, 55(05):64-66. (核心)

（34）徐兵,翁剑峰,刘二强.基于VB开发的智能平台在圆锥曲线异形螺纹中的应用.制造技术与机床, 2021, (07):164-167. (核心)

（35）林金保,巩毅,牟维鹏,许鹏, 刘二强,常超.连续Cf/Al复合材料板双辊铸轧制备及力学性能研究.稀有金属材料与工程, 2021, 50(10):3745-3750. (SCI)

（36）Yaohui Song, Yugui Li, Guanghui Zhao, Haitao Liu, Huaying Li, Juan Li,Erqiang Liu. Electron Backscatter Diffraction Investigation of Heat Deformation Behavior of 2205 Duplex Stainless Steel. Steel Research International, 2021, 92(5), DOI:10.1002/srin.202000587. (SCI)

（37）Xin Hao, Gesheng Xiao, Tao Jin, Buyun Su,Erqiang Liu, Xuefeng Shu. Effect of indentation size on strain rate sensitivity of zirconia ceramics by nanoindentation. Journal of the Australian Ceramic Society, 2021, 57(5):1471-1478. (SCI)

（38）Weipeng Mu, Jinbao Lin, Yi Gong, Dongxu Wu,Erqiang Liu. Microstructure and Mechanical Properties of Ni-Coated Continuous Carbon Fibers-Reinforced Pure Aluminum Matrix Composites Prepared by Twin-Roll Casting Method. Advanced Engineering Materials, 2021, 23(12), DOI: 10.1002/adem.202100420. (SCI)

（39）周晨,林金保,何文慧,牟维鹏,刘二强.基于VPSC仿真的ZK60镁合金拉伸变形行为.稀有金属材料与工程, 2022, 51(07):2429-2435. (SCI)

（40）冯超,徐家亮,刘二强.热处理参数对铝合金塑性成形性能分析.精密成形工程. 2022, 14(05):36-41. (核心)

（41）冯超,刘二强,宋少楠.半球形力学模型的平头压入材料弹塑性特征.弹性体. 2022, 32(02): 55-60. (核心)

（42）赵宏伟,杨贤樑,张嵩,尤孟春,刘二强*(通讯作者).基于晶体塑性的DD6单晶合金力学性能及织构演化行为研究.特种铸造及有色合金. 2024. http://kns.cnki.net/kcms/detail/42.1148.TG.20240315.1842.008.html. (核心)

（43）Weipeng Mu, Jinbao Lin,Erqiang Liu, Chen Zhou, Wenhui He. Fabrication of continuous carbon-fibers reinforced aluminum matrix composites and coating evolution during heat treatment. Journal of Materials Research and Technology-JMR&T, 2022, 17:1852-1867. DOI:10.1016/j.jmrt.2022.01.071 (SCI)

（44）Weipeng Mu, Jinbao Lin, Yi Gong, Dongxu Wu,Erqiang Liu. Effect of Pouring Temperature on Microstructure and Mechanical Properties of Continuous CF-Reinforced Al-10Mg Matrix Composites. Rare Metal Materials and Engineering, 2022, 51(5): 1606-1612. DOI:10.1016/j.jmrt.2022.01.071 (SCI)

（45）Chen Zhou, Jinbao Lin, Weipeng Mu, Weijie Ren,Erqiang Liu. Effects of Different Deformation Modes on Texture Evolution and Mechanical Behavior of As-Extruded AZ31 Alloy under Compression along Different Directions. Journal of Materials Engineering and Performance, 2023, 32(4): 1737-1746. DOI:10.1007/s11665-022-07236-y (SCI)

（46）Jianguo Wu, Hongwei Zhao, Yu Wang, Jinbao Lin, Gesheng Xiao,Erqiang Liu*(通讯作者), Qiang Shen, Xuexiao Yang. Micro mechanical property investigations of Ni-based high-temperature alloy GH4169 based on nanoindentation and CPFE simulation. International Journal of Solids and Structures, 2022, 258: 111999. DOI10.1016/j.ijsolstr.2022.111999 (SCI)

（47）Weipeng Mu, Jinbao Lin,Erqiang Liu, Wenhui He, Zhiquan Huang. Fabrication and interface optimization of continuous CF/Al composites with different reinforcement volume fraction. Journal of Alloys and Compounds, 2023, 938: 168297. DOI:10.1016/j.jallcom.2022.168297 (SCI)

★发明专利授权

1.王鹤峰,袁国政,靳晓敏,李志刚,树学峰,刘二强.一种铜掺杂二氧化钛镀层的制备方法：中国, ZL201310014293.4 [P]. 2015-11-18.

2.王鹤峰,郭美卿,刘二强,李志刚,袁国政,树学峰.一种镍铜合金渗镀层的制备方法：中国, ZL201310014455.4 [P]. 2016-02-17.

3.王鹤峰,李飞, 靳晓敏, 刘二强, 于菲菲.一种氮化纳米多孔Ti-Ag的制备方法：中国, ZL201510227914.6 [P]. 2016-08-17.

4.王鹤峰,袁国政,靳晓敏,李飞,刘二强,于菲菲.一种非晶纳米多孔二氧化钛负载石墨烯光催化薄膜的制备方法：中国, ZL201510228118.4 [P]. 2017-04-05.

5.树学峰,刘二强,王鹤峰,高志鹏,肖革胜,袁国政,李志刚.一种可变径局部原位压入测试装置：中国, ZL201510241983.2 [P]. 2017-07-14.

6.肖革胜,金涛,刘二强,段茜,树学峰,李志刚,邢学刚.一种原位压入测试提取金属弹塑性参数的方法：中国, ZL201810216778.4 [P]. 2020-05-15.

7.刘二强,刘俊, 李华英, 赵广辉, 林金保, 贾有.浮封应力松弛漏油寿命预测方法及长效密封浮封装置：中国, ZL201910396058.5 [P]. 2020-07-24.

8.刘二强,孔令宇,赵广辉,李华英,林金保,贾有,常超.一种模块化可控延时触发装置：中国,ZL 201911210322.8 [P]. 2021-08-03.

9.贾有,刘二强, 樊艳红,李兴国.一种基于频域谱分解的随机动载荷识别方法：中国, 2020101192216. 2020-02-26.

10.林金保,常超,刘二强,王婷婷,许鹏,吴一菲.一种连续纤维增强金属基复合材料板带制备设备及方法：中国, 2018111113976. 2018-09-23.

11.肖革胜，苏步云，刘二强，树学峰，孟璐.一种消除压入尺度效应影响的金属蠕变性能参数获取方法: 中国, 202110576701X. 2023.03.24

12.牟维鹏，林金保，何文慧，刘二强，李文文，方晓燕.一种碳纤维增强金属板轧制成型设备及方法: 中国, 2021113346690. 2023.06.09

13.马立峰，李华英，赵广辉，蔡志辉，李玉贵，刘二强，宋耀辉.一种高温合金双辊铸轧工艺：中国, 2022102201531. 2024-04-12.

★发明专利申请

1.林金保,武东旭,巩毅,刘二强,常超,吴一菲,许鹏.一种连续碳纤维增强铝基结构板铸轧成型设备及方法：中国, 2018115661787. 2018-12-21.

2.林金保,牟维鹏,武东旭,巩毅,刘二强,常超,刘晟,周晨.一种连续纤维增强交叉肋金属板成型设备及方法：中国, 2019111432158. 2019-11-20.

3.李玉贵,宋耀辉,王顺,李华英,赵广辉,刘二强. Gleeble热模拟试验机管材挤压模具及其使用方法：中国, 2019112755293. 2019-12-12.

4.林金保,刘二强,常超,王婷婷,许鹏,吴一菲,巩毅,武东旭.一种在线熔融碳纤维增强铝镁复合板铸轧成型设备及方法：中国, 2018115291243. 2019-12-14.

5.刘二强，武建国，肖革胜，孔令宇，李华英，赵广辉，林金保.一种汽车尾气净化装置：中国, 2021101010439. 2021-01-26.

6.杨雪霞，孙勤润，林金保，王则，刘二强，邢学刚，申强. BGA焊点结构参数优化方法：中国, 2023101396310. 2023-05-09.